Closed Network - Ricoh SP 5200S Operating Instructions Manual

2. Other Transmission Features
• p.335 "General Settings"
• p.339 "Send Settings"

Closed Network

2
Transmission will only take place if the destination's Closed Network Code is the same as yours.
This function can stop you accidentally sending information to the wrong place.
• You must program a Closed Network Code beforehand, using Program Closed Network Code
under Facsimile Features. For details about the programming method, see "Initial Settings".
• This function is not available with Internet Fax, e-mail transmission, and folder transmission.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
3. Select [Option Setting].
4. Press [Closed Network] to highlight it.
To cancel a Closed Network Transmission, press [Closed Network] again.
5. Press [OK] twice.
182