Ricoh SP 5200S Operating Instructions Manual page 409

This Machine (Transfer Station)
Requesting party
Transfer
Request
Print
Inform the Requesting Party of the SUB Code assigned to the Transfer Box. When they want to have a
document transferred by your machine, ask them to send the document using SUB Code Transmission
and specify this SUB Code. If a password has also been programmed, inform them of this too, and ask
them to enter it as the SID code.
You can store the following items:
• Box Name (required)
Up to 20 characters.
• SUB Code (required)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
• End Receiver (required)
You can store five End Receivers (destinations to which documents are forwarded) for each box.
Specify End Receivers using a single or group destination programmed in the destination list
beforehand.
• Password (optional)
Up to 20 characters long and can be composed of digits [0]-[9], [ ], [ ], and spaces (the first
character cannot be a space).
When programming a password, a mark is displayed in front of the Box name.
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Box Setting].
4. Check that [Program / Change] is selected.
Transfer Box Transfer Box
End Receiver
A
End Receiver
B
End Receiver
C
BZR049
Box Settings
7
407