Reading The Display; Reading The Display Panel And Using Keys - Ricoh SP 5200S Operating Instructions Manual

Reading the Display

This section explains how to use control panel and screen-displayed keys.
The display guides you through operations, shows messages, machine status, and destinations
registered in the destination lists.
If you press the [Facsimile] key or [Clear Modes] key during operation, the standby display appears.
• This machine automatically returns to standby mode if you do not use the machine for a certain
period of time. You can select the period using the Facsimile Auto Reset Timer in System Settings.
• The Facsimile Features menu includes a user parameter setting (switch 17, bit 3) that enables you
to configure the machine to return to standby mode whenever it finishes scanning an original, see
"Parameter Settings".
• To manually return to the standby display, do one of the following:
• If you have placed the original in the Auto Document Feeder (ADF) and have not pressed the
[Start] key, remove the original.
• If you have not placed an original, press the [Clear Modes] key.
• If you are in User Tools mode, press the [User Tools/Counter] key.
• p.375 "Parameter Settings"

Reading the Display Panel and Using Keys

This section explains key functions and messages that appear on the control panel.
18