Ricoh SP 5200S Operating Instructions Manual page 424

8. Appendix
IP-Fax Transmission and Reception
Component
Network
Scan line density
Maximum original size
Maximum scanning size
Transmission protocol
8
Compatible machines
IP-Fax transmission function
IP-Fax reception function
422
Specifications
Standard:
• Ethernet interface (100BASE-TX/10BASE-T)
Optional:
• Gigabit Ethernet interface (1000BASE-T/100BASE-TX/
10BASE-T)
• IEEE 802.11a/b/g wireless LAN interface
8 × 3.85 lines/mm, 200 × 100 dpi (Standard character),
8 × 7.7 lines/mm, 200 × 200 dpi (Detail character),
8 × 15.4 lines/mm (Fine character: optional),
16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character:
optional)
1
Standard: A4 , 8 / × 14
2
Custom: 210 × 1,200 mm, 8
1
210 × 1,200 mm, 8 / × 47 inches
2
Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC
3261 compliant), H.323 v2
IP-Fax compatible machines
Specify an IP address and send faxes to an IP-Fax compatible
fax through a network.
Also capable of sending faxes to a G3 fax connected to a
telephone line via a VoIP gateway.
Receive faxes sent from an IP-Fax compatible fax through a
network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
1
/ × 47 inches
2