Installing The Steering Arm; Installing The Upper Case - Yamaha F25C Service Manual

Installing the steering arm

1. Install the washer 1, bushing 2, and
straight key 3 onto the steering arm 4.
2. Place the swivel bracket 5 in an upright
position, and then install the steering arm
onto the bracket.
3. Install the bushing 6, new O-ring 7, and
bushing 8 onto the swivel bracket.

Installing the upper case

1. Install the upper mounting bolts into the
swivel bracket 1.
2. Install the upper mounting nuts 2 and
then tighten them to the specified torque.
3. Install the lower mount housing 3, lower
mounting bolts 4, lower mounting nuts
5, lower mounting bolts 6, and lower
mounting nuts 7, and then tighten the
nuts finger tight.
6D55F11
Upper case, steering arm
4. Tighten the lower mounting nuts 5 to the
specified torque, then tighten the lower
mounting nuts 7 to the specified torque.
Upper mounting nut 2:
24 N·m (2.4 kgf·m, 17.7 ft·lb)
Lower mounting nut 5 and 7:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
1
2
3
4
5
6
7
8
9
7-12