Installation Tips; Tips On The Boiler Room; Tools, Materials And Accessories; Disposal - Buderus Logano G215 WS Installation And Maintenance Instructions Manual

Oil and gas-fired special
Hide thumbs Also See for Logano G215 WS:
Table of Contents

Advertisement

1.4.2 Installation tips

RISK TO LIFE
through the explosion of volatile gases.
Work on gas-carrying parts may only
WARNING!
be carried out by qualified and
authorised personnel.
RISK TO LIFE
from electric shock.
Only qualified electricians are
WARNING!
permitted to carry out electrical work.
Before you open the control device:
Isolate all poles of the mains power
supply and secure against
unauthorised re-connection.
Please observe all installation
instructions.

1.4.3 Tips on the boiler room

RISK TO LIFE
from poisoning.
Insufficient ventilation can lead to
WARNING!
dangerous flue gas leaks.
Never block off or obstruct air ducts and
vents or reduce their size.
If an obstruction cannot be removed
immediately, the boiler must not be
operated.
RISK OF FIRE
from flammable materials or liquids.
Never store flammable materials or
WARNING!
liquids in the immediate proximity of the
boiler.
1.5

Tools, materials and accessories

Standard tools, as used in central heating and gas and
water systems, are required to install and maintain the
boiler.
The following may also prove useful:
– Sack trolley with strap or Buderus boiler trolley
– Timber support
– Cleaning brushes and/or chemical cleaning agent for
wet cleaning
Logano G215 WS - We reserve the right to make any changes due to technical modifications.
If the boiler is delivered in sections, you will also require
the following:
– Compression tool 1.2 if the boiler is supplied in
sections (
Compression tool documentation)
– Flat board
– White spirit
– Installation kit (accessory)
– Bench hammer and wooden or rubber mallet
– Half round file
– Screwdriver (Philips and slotted head)
– Flat chisel
– Spanner SW 13, 19, 24, 36 and Allen key SW19
– Support wedge, flat iron
– Cleaning rags and cloth
– Fine emery cloth
– Wire brush
– 3-in-1 oil
– Spirit level, ruler, chalk, straight edge
– Flange with air vent valve (for pressure test)
1.6

Disposal

Dispose of packaging in an environmentally
responsible manner.
Dispose of all heating system components that have
to be replaced at an authorised disposal site.
Safety
1
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents