Buderus Logano G215 WS Installation And Maintenance Instructions Manual page 33

Installing the front boiler cover
Slot the front boiler cover with its cutout onto the
upper tie-bar and push back.
Secure the front boiler cover to the side panels using
two self-tapping screws.
USER NOTE
Installing the rear boiler cover
( Section 8.7, page 41).
Installing the cable entry
Secure the cable entry to the hole in the boiler rear
panel.
Insulating the connecting block
Cut out the connecting block insulating shells at the
indicated and required positions.
Logano G215 WS - We reserve the right to make any changes due to technical modifications.
Assembling the boiler block
Fig. 44 Installing the front boiler cover
Fig. 45 Installing the cable entry
Fig. 46 Cutting out the insulating shells
7
33