Buderus Logano G215 WS Installation And Maintenance Instructions Manual page 30

7 Assembling the boiler block
Installing the upper tie-bar
Secure the upper cross bar using the nuts provided
on the threaded anchor rods.
Installing the lower tie-bar
Secure the lower tie-bar to the front section using
hexagon bolts.
Installing lagging
Place the lagging over the boiler block.
Push the lagging under the boiler block, in the
direction of the arrow.
Position the lagging tabs in front of the upper tie-bar
and draw together with a spring clip.
30 Logano G215 WS - We reserve the right to make any changes due to technical modifications.
1
Fig. 36 Fitting the upper cross bar
1 Anchor rods
Fig. 37 Fitting the lower cross bar
Fig. 38 Installing lagging
1 Spring clip
2 Lagging tabs
1
2