Table of Contents
Advertisement
8.6
Making the electrical connection
RISK TO LIFE
from electric shock.
Only qualified electricians are
WARNING!
permitted to carry out electrical work.
Before you open the control device:
Isolate all poles of the mains power
supply and secure against
unauthorised re-connection.
Please observe all installation
instructions.
8.6.1 Fitting the control device
Locate the control device locking tabs in the slots.
Push the control device towards the burner door.
Push the control device down until the locking tabs
click into place in the openings.
Remove the control device cover. To do this remove
the cover screws.
Secure the control device using self-tapping screws.
Logano G215 WS - We reserve the right to make any changes due to technical modifications.
1
Fig. 58 Fitting the control device
1 Flexible hooks
2 Locking tabs
3 Slots
4 Openings
Fig. 59 Removing the cover
1 Cover screws
2 Self-tapping screws
Boiler installation
2
3
4
1
2
8
39
Hide quick links:
Advertisement
Table of Contents
