Making The Electrical Connection; Installing The Control Unit - Buderus Logano plus GB402 Installation And Maintenance Instructions Manual

6.7

Making the electrical connection

The boiler can only function fully with an installed control
unit.
DANGER: Risk to life from electric shock!
B Prior to all electrical installation work,
isolate all poles of the power supply and
secure against unintentional reconnection.
When connecting electrical components, also observe
the connection diagram and instructions of the relevant
product.
Observe the following points regarding the
electrical connection:
B Electrical work on heating systems must
only be carried out by qualified
electricians. If you are not suitably
qualified, have an electrical contractor
carry out the electrical connections.
B Observe all local regulations.
Logano plus GB402 - Subject to technical modifications!
6.7.1

Installing the control unit

Subject to preference, the control unit may
be fitted in 2 different positions.
The decorative fascia cannot be fitted.
Fig. 19 Control unit installation versions
B Locate the push-in hooks of the control unit in the oval
holes of the front boiler cover.
B Push the control unit towards the outside edge of the
boiler.
B Let the resilient hooks of the control unit click into the
openings by pushing the control unit.
Fig. 20 Fitting the control unit (Logamatic MC10)
6
Installation
25