Electrical Connection - Buderus Logano G124X II/SP Installation And Maintenance Instructions Manual

7 Boiler installation
7.3

Electrical connection

The electrical connections of the boiler must be
manufactured as specified by the local codes and the
current regulations of the National Electrical Code,
ANSI/NFPA–70.
In Canada the regulations of CSA C 22.1 Canadian
Electrical Code, Part 1, must be observed.
The boiler must be grounded as specified by the
regulations of the relevant local authorities; otherwise
follow the regulations of the National Electrical Code,
ANSI/NFPA–70.
USER NOTE
When making the electrical connections
follow the circuit diagrams on
to page 78.
Install an ON/OFF switch near the boiler.
RISK TO LIFE
from electric shock.
When conducting maintenance work
WARNING!
label all cables before disconnecting
them.
If cables are connected incorrectly the
system may not operate correctly with
possibly dangerous consequences.
Check that the heating system functions correctly
after any maintenance work.
16 Installation and maintenance instructions Logano G124X II/SP special gas-fired boiler • Issue 04/2005
page 74
We reserve the right to make any changes due to technical modifications.