Check Performance On Test Menu - JRC JMA-932B-SA User Manual

8.4.1

Check Performance on Test Menu

The radar operating state can be checked by opening the Test Menu.
Procedures 1.
2. Select the items to be checked.
Self-diagnosis function (Self Test)
Checking of memory, scanner unit, and communications Lines
Memory Test
TXRX Test
Line Test
GPIO Test
System Monitor
[1] Memory Test
Checking for the performance of built-in memory.
When no abnormality is found, "OK" is displayed.
When an abnormality is found, "NG" is displayed.
[2] TXRX Test
Checking for signals from the scanner.
When no abnormality is found, "OK" is displayed.
When an abnormality is found, "NG" is displayed.
In standby, ** will appear.
Perform the following menu open procedure to open the Test Menu.
Main
→ Test Menu
The list of check items will appear.
Self Test
Monitor Test
Keyboard Test
Magnetron Current
MON Display
Navigation Alarm Log
System Alarm Log
System Information
Self-diagnostic function
Monitor check
Operation unit check
Indication of magnetron current
Performance monitor
Navigation alarm log display
Error log display
System information display
[1] Memory check
[2] Scanner check
[3] Line Test
[4] GPIO Test
[5] System Monitor check
8-11