JRC JMA-932B-SA User Manual page 117

Using the automatic sea clutter suppression mode
The sea clutter suppression in accordance with the intensity of sea clutter is possible. Use this
mode when the sea clutter's intensity differs according to directional orientation.
Procedures 1 Press the [SEA] dial. Alternatively, Left-click the Sea
located at the lower left of the display.
The automatic sea clutter suppression mode is selected, and Sea AUTO is displayed in
the lower left of the radar display.
2 Adjust the sea clutter suppression by turning the [SEA] dial.
Even if the automatic sea clutter suppression mode is selected, it can be finely adjusted
with manual operation by turning the [SEA] dial.
Note: When the automatic sea clutter suppression mode is selected, the automatic rain/snow
suppression mode is switched to the manual mode.
To select both the sea clutter suppression function and the rain/snow suppression function in the
automatic mode, use the automatic rain/snow suppression mode.
Cancellation 1 Press the [SEA] dial. Alternatively, Left-click the Sea
located at the lower left of the display.
The automatic sea clutter suppression mode is cancelled, and Sea MAN is displayed
in the lower left of the radar display.
3.2 Observe and Adjust Video
3-10
MAN button
3
AUTO button