JRC JMA-932B-SA User Manual page 162

Correcting the mark or vertex of a line (Insert/Move Vertex)
With regard to the created user map, a mark or line is corrected.
Procedures 1
2
3
4
5
(Example)
Open the Edit User Map menu by performing the following menu
operation.
U.Map
→ Edit User Map
The Edit User Map menu will appear.
Left-click the Insert/Move Vertex
The user map insertion/correction mode is selected.
Add/Move VTX(SP) is displayed in the cursor mode located at the upper right of the
radar display.
Put the cursor on the mark or vertex of a line, and left-click.
When the mark or vertex of a line to be corrected is selected, the cross cursor mark will
appear.
Move the cross cursor mark to the destination, and left-click.
The selected mark or vertex of the line is moved to the destination.
To correct another mark or vertex of a line, repeat procedures 3 and 4.
When finished with the correction of all items, left-click the
button.
The cursor mode changes to the normal operation mode, terminating the user map
insertion/correction mode.
Original vertex
Move
New vertex
button.
3-55
Exit