JRC JMA-932B-SA User Manual page 433

Note: The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution
MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).
5) Water temperature, 6) Current and 7) Direction of wind, velocity of wind in the
above item: (36) Receivable Signal are applied since the Display Unit software:
Ver. 2.00.
(37) Sendable Signal
1) Slave video
2) Navigation Information
IEC61162-1/2
3) External alarm
4) Acknowledge
5) Watchman reset
6) Remote maintenance
7) AIS alarm acknowledge
8) External monitor
Radar video: TIY, VD, BP(2048p), BZ
Radar system data: RSD
Own ship data: OSD
Tracking target data: TTM, TLL, TTD, TLB, JRC-ARPA
AIS target data: TTM, TLL, TTD, TLB
Alarm: ALR
Default setting: normally close contact
Maximum current: 200mA
(SYSALM, ARPAALM, PWRALM)
Contact output
Contact output
JRC format
ACK
Multi scan monitor, Analog RGB, HD15pin
NWP-46(Maximum length of the cable: 10m)
11-12
Specifications
11