Set Own Ship Mark (Own Ship Setting) - JRC JMA-932B-SA User Manual

3.8.4

Set Own Ship Mark (Own Ship Setting)

This function enables the setting of detail information about own ship mark display.
Procedures 1
[1] Own Ship Symbol Type (Own Ship Symbol)
･ Set the own ship symbol to display.
[2] Display Danger Detection Vector (Display Vector Area)
･ Set the danger detection vector in the display.
Note: This setting is only to On/Off a display. When controlling a danger detection function, refer to
"3.8.5 Setting of Danger Detection".
[3] Display Danger Detection Sector (Display Sector Area)
･ Set the danger detection sector in the display.
Note: This setting is only to On/Off a display. When controlling a danger detection function, refer
to"3.8.5 Setting of Danger Detection".
Open the Own Ship Setting menu by performing the menu operation
below.
Main
→ Own Ship Setting
The Own Ship Setting menu will appear.
Change the set value of the each item, enable to set own ship mark (symbol) display and
operation, being detailed.
Beam Line : Display only beam line.
Outline : Display outline.
On : Display danger detection vector.
Off : Not display danger detection vector.
On : Display danger detection sector.
Off : Not display danger detection sector.
3-69