JRC JMA-932B-SA User Manual page 377

Magnetron Replacement Procedure for Scanner Unit NKE-1125
(1) Before beginning work, turn off the
safety switch located on the bottom of
the stern side of the scanner unit.
(2) Loosen the hexagonal bolts (4) and
remove the pedestal cover.
Remove the cover on the right (starboard) side.
(3) Loosen the screws (four M4 screws) to
remove the magnetron cover.
8.5 Replacement of Major Parts
Bow direction
Bow
direction
Loosen the four
hexagonal bolts.
When the starboard side cover is
removed.
Magnetron cover
Loosen the
four screws.
8-22
Turn off the safety
switch.
8 8 8