JRC JMA-932B-SA User Manual page 92

②：Interference rejection (IR) mode switching
The list opens whenever this button is clicked.
Clicking the item in the list, selects the interference rejection mode.
Selecting item is IR Off , IR Low , IR Medium and IR High .
③：Target enhance (ENH) mode switching
The list opens whenever this button is clicked.
Clicking the item in the list, select the target enhance mode.
Selecting item is
④：Radar video processing (PROC) mode switching
The list opens whenever this button is clicked.
Clicking the item in the list, selects the radar video processing mode.
Selecting item is
Peak Hold .
⑤：Function (FUNC) mode switching
The list opens whenever this button is clicked.
Clicking the item in the list, selects the function mode.
Selecting item is FUNC Off , Coast , Deep Sea , Fishnet and
⑥, ⑦, ⑧,and ⑨：Gain, Sea clutter suppression (Sea), Rain / snow clutter
Adjust the gain, sea clutter suppression, rain / snow clutter suppression and tune using the track ball.
When the button is clicked on, the adjustment value is shown at the lower-left of the screen. Make
adjustments by control bar. Determine the adjustment by left-clicking Exit button.
When canceling these adjustment value, left-click
⑩, ⑪,and ⑫：Sea clutter suppression (Sea) mode, Rain and snow clutter
Use these functions to switch to the manual or automatic mode of sea clutter suppression, rain and snow
clutter suppression, and tune. The bar on the left side indicates the position of the dial.
The mode is switched to
When rain and snow clutter suppression is switched to an automatic mode, sea clutter suppression is
switched to an automatic mode also.
ENH Off , ENH Level1 , ENH Level2
3Scan CORREL ,
suppression (Rain), Tune adjustment
suppression (Rain) mode, and Tune mode switching
MAN (manual) / AUTO (automatic) whenever the button is clicked.
and ENH Level3.
4Scan CORREL , 5Scan CORREL ,
Cancel button.
2-19
Remain and
Storm .