JRC JMA-932B-SA User Manual page 127

3 Left-click the
The manually entered latitude value is determined. Then, enter the longitude value.
4 If stop entering a value, put the cursor on Close
the button.
The latitude/longitude input screen will close without reflecting the set value to the
operating state.
Longitude input screen
Numeric button
数字ボタン
ＣＬＲボタン Clear button
Close button
Ｃｌｏｓｅボタン
Entering longitude
Procedures 1 On the longitude input screen, sequentially press numeric keys to enter
latitude (XX°XX．XXX').
For example, to enter 12°34.567', sequentially press numeric keys as follows.
1 → 2 → 3 → 4 → 5
※ A numeric input outside the input range is not accepted.
2 To make change between east longitude and west longitude, use
and
East longitude: Left-click the E button.
West longitude: Left-click the W button.
3 Left-click the
The manually entered longitude value is determined.
ENT button.
When left-clicking CLR button, the value is canceled.
W .
ENT button.
3-20
3.3 Operation Procedures
and then left-click
Enter button
ＥＮＴボタン
→ 6 → 7
3
入力範囲 Input range
E button
Ｅボタン
Ｗボタン W button
E