JRC JMA-932B-SA User Manual page 233

[III] Operating EBL and VRM Concurrently (EBL and VRM)
Procedures 1 Put the cursor on the intersection marker ( ○
When the cursor is moved to it,
upper right of the cursor. The EBL and VRM become operable when left-clicking.
2 Move the cursor to the bearing / range to be set.
The EBL and VRM will move as the cursor moves.
3 Left-click.
The EBL and VRM will be fixed.
[IV] Operating Parallel Index Lines (PI)
To change the direction of parallel index lines
Procedures 1 Put the cursor on near the center of line, and left-click.
When the cursor is moved there, it will turn into "
upper right of the cursor. The parallel index lines become operable when left-clicking.
2 Move the cursor to the direction to be set.
The parallel index lines will change the direction as the cursor moves.
3 Left-click.
The parallel index lines will be fixed.
4.1 Use of Navigation Tools
EBL1 VRM1 or EBL2 VRM2
" and PI will be displayed at the
4-18
left-click
or ● ), and
is shown at the
.
4