JRC JMA-932B-SA User Manual page 93

Upper right of the display
①：Cursor bearing numeric value display true / relative switching
The bearing numeric value display
whenever this button is clicked.
②, ③, ④,and ⑤：EBL1 / 2 and VRM1 / 2 adjustment
These functions set the EBL1 , VRM1 , EBL2 , and VRM2
When the button is clicked on, the operation right is acquired. Make adjustments by moving the track ball
to the left and right Determine the adjustment by left-clicking.
⑥and ⑦：EBL1, EBL2 numeric value true / relative switching
The EBL1 / 2 bearing numeric value display
whenever the button is clicked.
When the button is clicked for 2 seconds, the EBL / Cursor Setting menu is displayed.
⑧，⑨，⑩and ⑪：EBL1, VRM1, EBL2 and VRM2 display switching
These functions set the EBL1 , VRM1 , EBL2 , and VRM2 displays to On / Off.
When the button is clicked on, the operation right is acquired.
2.3 Functions of Software Buttons
T (true bearing) / R (relative bearing) of the cursor is switched
T (true bearing) / R (relative bearing) is switched
2-20
acquire the operation right.
2