Operating Ebl Maneuver Function (Ebl Maneuver Setting) - JRC JMA-932B-SA User Manual

4.1.6

Operating EBL Maneuver Function (EBL Maneuver Setting)

[I] Initial Setting (EBL Maneuver Setting)
Procedures 1
2
Note: A wrong initial setting affects the maneuver curve function explained below.
Open the EBL Maneuver Setting menu by performing the following
menu operation.
Main
EBL Maneuver Setting
Set the following parameters.
Reach :Sets the range from when the rudder is steered to when the ship beings
to turn.
Turn Mode
Radius
Rate
Turn Set :Select the setting for turning.
If
If Rate is selected
For inputs to the value input screen, refer to Section "3.3.6 Operation on Numeric Value,
Latitude / Longitude and Character Input menu".
Radius is selected
4-15
:Select a turn mode.
:Turning radius (nm)
: Rate of turn (deg/min)
:Turning radius (nm)
:Rate of turn (deg/min)