Cursor Modes (Cursor) - JRC JMA-932B-SA User Manual

5.1.4

Cursor Modes (Cursor)

Types and Functions of Cursor Modes
The types of cursor modes are listed in the table below. To use the function of a cursor mode, move the cursor
onto the PPI object and left-click.
Mode
Acquire TT
Cancel TT
Activate AIS
Deactivate AIS
TGT Data
Cancel TGT Data
Property
AUTO
Mark
Undo
TTG/ETA
Change of Cursor Mode
Procedures 1
Note: If the function of a selected cursor mode is not used for one minute or more, the cursor mode is
automatically changed to AUTO .
Enabling the target tracking function to acquire a target in manual mode.
Canceling a tracking target.
Activating AIS targets.
Deactivating AIS targets.
Displaying the numeric data of a tracking target or AIS target.
Canceling a tracking target data.
Displaying the information of tracked targets, AIS targets, and marks.
Changing operation in accordance with the object at the cursor position.
Putting a temporary mark.
Returning user mapping edit to the condition one ahead.
Displaying TTG and ETA of the preset vessel speed in the upper right of the screen to
the left clicked latitude longitude.
Right click on PPI and select from the mode list.
The selected cursor mode will be shown at the cursor mode (upper right of the
display).
Function
5-13
radar