JRC JMA-932B-SA User Manual page 336

Setting the Alarm Buzzer (Sound Output Mode)
Procedures 1. Open the Serviceman Menu.
2. Perform the following menu open procedure to open the Alarm menu.
3
4. Select the function to be used.
Setting and Alarm Function
Alarm
Operation
Setting
On
Off1
Off2
Note: If Sound Output Mode is set to ②, when Buzzer Volume menu setting is disabled.
Acknowledge State : Setting of ALR sentence.
A:ACK
V:UNACK
This function enables the control of alarm buzzer.
Installation Menu
Left-click the Sound Output Mode combo box.
The item is switched.
On
Off1 The explanation is in the following.
Off2
Operation
Miss
①
①
① : Followed by Buzzer Volume menu setting.
② : Alarm Buzzer is turned off.
For how to setting Buzzer Volume menu, see Section "3.8.9 Adjust Sound Volume (Buzzer
Volume)".
: Add acknowledgement to ALR sentence.
: Add no acknowledgement (unrecognized) to ALR
sentence.
→ Alarm
→ Sound Output Mode
CPA/ New
TCPA Target
①
②
7-17
Lost NAV System
②
①
Interswitch
②