Cursor Modes (Cursor) - JRC JMA-9133-SA Instruction Manual

JMA-9100 Instruction Manual
5.1.4

Cursor Modes (Cursor)

5.1.4.1 Types and Functions of Cursor Modes
The types of cursor modes are listed in the table below. To use the function of a
cursor mode, move the cursor onto the PPI object and left-click.
Mode
ACQ TT
ACT AIS
TGT Data
CNCL TT
DEACT AIS
Data CNCL
Mark
Property
AUTO
5.1.4.2 Change of Cursor Mode
Procedures
1) Left-click the Cursor button located at the upper right of the
display. Alternatively, on the PPI, right-click and select a desired
cursor mode from the list.
The selected cursor mode will be shown at the cursor mode (Upper right of the display on
page 2-4).
>
5.OPERATION OF TARGET TRACKING AND AIS
Function
Enables the target tracking function to acquire a target in manual
mode.
Activates AIS targets, and sets a point filter.
Displays the numeric data of a tracking target or AIS target.
Cancels a tracking target.
Deactivates AIS target.
Hides the displayed numeric data of a tracked target or AIS target.
Puts a temporary mark.
Displays the information of tracked targets, AIS targets, and marks.
Changes operation in accordance with the object at the cursor
position.
If the function of a selected cursor mode is not used for one
i
minute or more, the cursor mode is automatically changed to
AUTO .
5－ 11
>
5.1 PREPARATION
5