Using The Ebl/Vrm Dial For The Setting - JRC JMR-7230-S Instruction Manual

6.5.2.3 Using the EBL/VRM dial for the setting

1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click [Alert] - [New Target Alarm] on the menu.
The [New Target Alarm] dialog is displayed.
3
Select AZ ([Use AZ1] or [Use AZ2]) to be set.
4
Click on the [Make AZ1] button or [Make AZ2] button.
The cursor enters the AZ creation mode.
5
Turn the EBL dial to set [Start Angle].
6
Turn the VRM dial to set [Start Distance]
7
Press the EBL dial and the VRM dial.
8
Turn the EBL dial to set [End Angle].
Section 6 Target Tracking and AIS
Start angle
Start distance
6-26