Quick Start Sections; Obtaining Additional Information - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Overview
Using This Guide
1-6
For example, if you have a two-port T1 module in slot one, you would
configure the left T1 port by entering:
ProCurve(config)# interface t1 1/1
To configure the other T1 port, you would enter:
ProCurve(config)# interface t1 1/2
As mentioned earlier, the Ethernet interfaces are also labeled in <slot>/<port>
notation as eth 0/2 and eth 0/1.

Quick Start Sections

Each chapter includes a Quick Start section that provides the instructions you
need to quickly configure your ProCurve Secure Router. Designed for experi-
enced network administrators, the Quick Start sections provide minimal
explanation.
The first time you perform a task, ProCurve Networking strongly recommends
that you read the entire chapter so you thoroughly understand how to manage
the ProCurve Secure Router. If you begin to use the Quick Start instructions
and find that you need additional information about a specific aspect of
managing the OS, check the "Contents" for that chapter to locate the section
that contains the explanation you need.
The Quick Start section is located at the end of each chapter. For the specific
page number, consult the "Contents" pages located at the beginning of each
chapter to find the relevant Quick Start.

Obtaining Additional Information

You will need the Adobe® Acrobat® Reader to view, print, or copy product
documentation.
1. Access the ProCurve Networking Web site at http://www.procurve.com.
2. Click Technical support in the bar on the left side of the screen, and then
click Product manuals. (See Figure 1-1.)
3. Click the name of the product for which you want documentation.
4. On the resulting Web page, double-click the document you want.
5. When the document file opens, click the disk icon in the Acrobat® toolbar
and save a copy of the file.