HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 841

Using the Web Browser Interface for Advanced Configuration Tasks
35. use the pull-down menu to select Advanced for the Policy Type in the Add
New Policy window. Click Continue. The Add New Policy to Security
Zone window is displayed.
Figure 14-29. Configuring Advanced Policies
36. For Policy Action, you can select one of the following:
• NAT—Select this option to configure either many-to-one NAT or one-
to-one NAT.
• Allow—Select this option to allow certain types of traffic.
• Discard—Select this option to discard, or block, certain types of
traffic.
Allow Reverse—Select this option to configure a policy that affects
•
return traffic.
37. For Destination Security Zone, select <Any Security Zone>, a particular
security zone, or <Self-bound>. This setting determines the destination
address of the traffic you want to select. The <Self-bound> option desig-
nates the destination as the internal IP stack—the router itself.
Configuring Access Control from the Web Browser Interface
14-41