Configuring Policies To Control Management Access To; Procurve Secure Router - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
29. To further define the traffic that will be translated to the private IP
address.
a. Select one of the following:
–
Forward only traffic specified below
– Forward only traffic specified below with port translation
Port translation allows you to define the port on which traffic will be
forwarded to the device on the internal network.
b. In the Protocol/Ports to Forward section, select a protocol from the
pull-down menu:
– ICMP
– TCP
– UDP
– AHP
– ESP
– GRE
– any
– specified
If you select <Specified>, enter the number for the protocol in the
field to the left.
c. If you have selected ICMP, TCP, UDP, you can select a port in the drop
down menu of the Matching Ports column.
d. If you selected the option for port translation, select the port on which
the traffic will be forwarded from the Add protocol/port pull-down
menu.
30. Click Apply. The policy you created is now listed on the Configure
Policies for Security Zone window.

Configuring Policies to Control Management Access to

the ProCurve Secure Router
31. To create a policy that controls management access to the router, use the
pull-down menu to select Admin Access for the Policy Type in the Add
New Policy window. Click Continue. The Add New Policy to Security
Zone window is displayed.
Configuring Access Control from the Web Browser Interface
14-39