Using The Firewall Wizard - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring the ProCurve Secure Router OS Firewall
14-26
Figure 14-16.Configuring Individual TCP and UDP Timeouts
5. You can also set different timeouts for specific TCP and UDP protocols.
These settings override the global, default setting.
a. In the General Firewall window, move to the Add/Modify/Delete IP
Policy Timeout window.
b. Select TCP or UDP from the Protocol pull-down menu.
c. Select the specific application from the Port Type pull-down menu.
d. Enter the session timeout in hours, minutes, and seconds in the fields
to the left of the corresponding labels.
e. Click Add/Modify.
f. You can delete timeout policies that have already been added. These
policies are listed below the Add/Modify button in the Delete Entries
section. Click the Delete button next to the right of the policy timeout.

Using the Firewall Wizard

The firewall wizard helps you to quickly configure NAT on a router that
connects to the Internet. The firewall wizard enables the router:
to perform many-to-one NAT on all traffic outbound to the Internet
to perform port forwarding to allow external traffic to internal servers
to drop all other external traffic