HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 827

N o t e
Using the Web Browser Interface for Advanced Configuration Tasks
The firewall wizard overwrites policies applied to both the private and public
interface. You should therefore use the firewall wizard before configuring
other security policies. You can then customize policies as described in
"Configuring Access Control from the Web Browser Interface" on page 14-30.
To use the firewall wizard to configure NAT:
1. Select Firewall Wizard under Firewall in the lefthand navigation bar. The
wizard will display in a new window.
2. The wizard warns you that it will overwrite previous configurations. Click
Next. The router must have at least two IP interfaces (a private and a
public) for the firewall wizard to proceed.
3. Choose the interface that connects to the Internet from the Interface pull-
down menu.
4. If Internet users do not need to access any servers internal to your
network, move to step 9.
Figure 14-17.Permitting Internet Users to Access an Internal Server
Configuring the ProCurve Secure Router OS Firewall
14-27