Prague - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

6. Create and configure the demand interface.
Dublin(config)# interface demand 1
Dublin(config-demand 1)# ip address 10.2.3.2 /30
Dublin(config-demand 1)# match-interesting list Demand1
Dublin(config-demand 1)# description Connection to Mannheim
Dublin(config-demand 1)# resource pool Pool1
Dublin(config-demand 1)# connect-sequence 10 dial-string 00496215551212
forced-isdn-64k busyout-threshold 4
7. Configure the ISDN group to bridge the bri interface with the demand
interface resource pool.
Dublin(config-demand 1)# isdn-group 1
Dublin(config-isdn-group 1)# connect bri 2/1
Dublin(config-isdn-group 1)# connect bri 2/2
Dublin(config-isdn-group 1)# resource pool-member Pool1
8. Configure and activate the BRI interfaces.
Dublin(config-isdn-group 1)# interface bri 2/1
Dublin(config-bri 2/1)# isdn ldn1 35315551213
Dublin(config-bri 2/1)# no shutdown
Dublin(config-bri 2/1)# interface bri 2/2
Dublin(config-bri 2/2)# isdn ldn1 35315551223
Dublin(config-bri 2/2)# no shutdown
Dublin(config-bri 2/2)# exit
9. Configure static routes to the Mannheim networks.
Dublin(config)# ip route 192.168.128.0 /24 demand 1
Dublin(config)# ip route 192.168.129.0 /24 demand 1
10. Save the configuration.
Dublin(config)# do write memory

Prague

The Prague office acts as a remote sales office for Eastern Europe. This office
requires a dedicated line to the Berlin office, a connection to the ISP, and an
on-demand connection to the Mannheim office to upload reports and other
information.
1. Configure and activate the LAN connection.
Prague(config)# interface eth 0/1
Prague(config-eth 0/1)# ip address 192.168.224.1 /24
Prague(config-eth 0/1)# no shutdown
Appendix A: Example Configuration
Configuring the Physical and Data Link Layers
A-17