N o t e
Using the Web Browser Interface for Advanced Configuration Tasks
Filtering, or Blocking, Traffic
5.
To block certain traffic from entering an interface, use the pull-down
menu to select Filter for the Policy Type in the Add New Policy window.
Click Continue. The Add New Policy to Security Zone window is dis-
played.
Figure 14-24.Filtering, or Blocking, Traffic Entering an Interface
6.
Enter a policy descriptor, which will be displayed when you view the
running-config. For example, you may want to document how the ACP is
going to be used. You could enter:
Control access to Eth 0/1 interface
To view the running-config, you must enter show running-config command
from the enable mode context in the CLI.
Configuring Access Control from the Web Browser Interface
14-33