Web Access Configuration - HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
8. To change the port for HTTPS server, enter the desired port number in the
box. The default is 443.
9. To enable the router's Secure Copy server, click the box.
10. To make the changes effective, click Apply. If you want to return to the
previously configured settings, click Cancel instead.

Web Access Configuration

Web sessions with the ProCurve Secure Router have a default timeout of 10
minutes, after which you must log in again for continued access to the Web
browser interface.
Figure 14-12.Web Access Configuration
1. To change the Inactivity Timeout, enter the number of hours, minutes,
and seconds in the boxes.
2. You can set the maximum number of concurrent connections to the Web
browser interface by entering the number in the Max Sessions box.
3. To make the changes effective, click Apply. Click Cancel to reset to the
previously configured settings.
Enabling IP Services on the Router
14-17