HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 838

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Access Control from the Web Browser Interface
14-38
Figure 14-27. Configuring One-to-One NAT
25. Enter a policy descriptor, which will be displayed when you view the
running-config.
26. For Public IP Address, use the pull-down menu to select Any or one of
the interfaces configured on the router. This setting determines the des-
tination addresses that the router will match for this NAT policy.
27. For Private IP Address, enter the address that the device is using on the
internal network.
28. To NAT all traffic destined for the public IP address that you defined,
select the Forward All Traffic option.