HP ProCurve Secure Router 7203 dl Advanced Management And Configuration Manual page 604

Link Layer Discovery Protocol
Viewing LLDP Information
12-6
ProCurve# show lldp neighbors detail
If you want to limit the display to the neighbor (or, for a multi-access network,
neighbors) of a specific interface, use the interface <interface ID> option.
For example, enter:
ProCurve# show lldp neighbors interface eth 0/1 detail
ProCurve# show lldp neighbors detail
Chassis ID: 00:12:79:05:25:D4 (MAC Address)
System Name: SiteA
Device Port: ppp 1 (Locally Assigned)
TTL: 120
Platform: ProCurve Secure Router 7203dl
Software: Version: 03.01, Date: Fri Aug 12 08:41:09 2005
Capabilities: Bridge, Router
Enabled Capabilities: Router
Local Port: ppp 1
Management Addresses:
Address Type: IP version 4, Address: 10.1.1.1
Interface Type: Interface Index, Interface Id: 15
Figure 12-3. Viewing Detailed Information about LLDP Neighbors
If you enter the show lldp neighbors command without any options, you can
also view a summary of the LLDP information. The summary includes only:
system name
(neighbor's) port ID
TTL
enabled capabilities
platform
local port
Neighbor's hostname
Neighboring device type
Address from which you
can configure the
neighbor