XG1200 User's Guide
4.2 Port Mirroring
It is possible to monitor the traffic by mirroring the frames sent or received by a port.
To configure Port Mirroring, carry out the following procedure in the administrator EXEC mode.
xg# configure terminal
xg(config)# mirror monitored-port <1-12>
[rx-mirroring-port <1-12>]
[tx-mirroring-port <1-12>]
xg(config)# exit
xg# show mirror
Command
28/258
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Task
Switch to global configuration mode.
Configure the ports to be monitored and mirror ports.
Exit to administrator EXEC mode.
View the status of port mirroring.