Intended Readers; Terms/Usage; Safety Instructions - Fujitsu SH-E514TR1 10 User Manual

1.

Intended Readers

This guide provides instructions to install the SH-E514TR1 10 Gigabit Ethernet SmartPro Switch, and how to configure
Web-based Management step-by-step.

Terms/Usage

In this guide, the term "Switch" (first letter capitalized) refers to the SH-E514TR1 switch, and "switch" (first letter lower
case) refers to other Ethernet switches. Some technologies refer to terms "switch", "bridge" and "switching hubs"
interchangeably, and both are commonly accepted for Ethernet switches.

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential
damage. Throughout this safety section, the caution icon (
to be reviewed and followed.
To reduce the risk of bodily injury, electrical shock, fire, or damage to the equipment, observe the following
precautions.

Observe and follow service markings.
o
Do not service any product except as explained in your system documentation.
o
Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose
you to electrical shock.
o
Only a trained service technician should service components inside these compartments.

If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or
contact your trained service provider:
o
The power cable, extension cable, or plug is damaged.
o
An object has fallen into the product.
o
The product has been exposed to water.
o
The product has been dropped or damaged.
o
The product does not operate correctly when you follow the operating instructions.

Keep your system away from radiators and heat sources. Also, do not block cooling vents.

Do not spill food or liquids on your system components, and never operate the product in a wet environment. If
the system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service
provider.

Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by shorting
out interior components.

Use the product only with approved equipment.

Allow the product to cool before removing covers or touching internal components.

Operate the product only from the type of external power source indicated on the electrical ratings label. If you
are not sure of the type of power source required, consult your service provider or local power company.
SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
A NOTE indicates important information that
helps a better use of the device.
A CAUTION indicates potential property damage
or personal injury.
CAUTION: Only trained and qualified service
personnel should install, replace or perform
maintenance on the Switch.
) is used to indicate cautions and precautions that need
1