Vent Pipe Flush With Adaptor Diagram; Combustion Air Pipe Attachment Diagram - Carrier 59TN6A Installation, Start-Up, Operating And Service And Maintenance Instructions

VENT PIPE ADAPTER WITH GASKET
INSTALLED ON FURNACE VENT
PIPE IS CUT FLUSH WITH TOP OF
ADAPTER.
ALIGN NOTCHES IN VENT PIPE
COUPLING OVER STAND-OFF
ON ADAPTER. TORQUE LOWER
CLAMP 15 LB-IN, WHEN REMAINING
VENT PIPE IS INSTALLED, TORQUE
UPPER CLAMP TO 15 LB-IN.
VENT PIPE FLUSH WITH ADAPTER
VENT PIPE FLUSH SHOWING COUPLING
Fig. 43 - Vent Pipe Flush with Adaptor
Al1339
Point elbow down towards
back of furnace
12"
256.0 mm
CASING SIDE ATTACHMENT
COMBUSTION AIR PIPE
(NON-DIRECT VENT)
J
TOP PLATE ATTACHMENT
COMBUSTION AIR PIPE
(NON-DIRECT VENT)
Fig. 44 - Combustion Air Pipe Attachment
Al1345
55