Ip Filter Match Criteria - Alcatel-Lucent 7210 SAS M Configuration Manual

Configuration Commands

IP Filter Match Criteria

dscp
Syntax dscp dscp-name
no dscp
Context config>filter>ip-filter>entry>match
Description This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match
criterion.
The no form of the command removes the DSCP match criterion.
Default
no dscp
Parameters
dscp-name — Configure a dscp name that has been previously mapped to a value using the dscp-
dst-ip
Syntax dst-ip {ip-address[/mask]} [netmask]
no dst-ip
Context config>filter>ip-filter>entry>match
Description
This command configures a destination IP address range to be used as an IP filter match criterion.
To match on the destination IP address, specify the address and its associated mask, e.g. 10.1.0.0/16.
The conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the destination IP address match criterion.
Default none
Parameters
ip-prefix — The IP prefix for the IP match criterion in dotted decimal notation.
mask — The subnet mask length expressed as a decimal integer.
netmask — Any mask epressed in dotted quad notation.
Page 134
name command. The DiffServ code point may only be specified by its name.
Values
be|cp1|cp2|cp3|cp4|cp5|cp6|cp7|cs1|cp9|af11|cp11|af12|cp13|af13|cp15|cs2|cp17|af21|cp1
9|af22|cp21|af23|cp23|cs3|cp25|af31|cp27|af32|cp29|af33|cp31|cs4|cp33|af41|cp35|
af42|cp37|af43|cp39|cs5|cp41|cp42|cp43|cp44|cp45|ef|cp47|nc1|cp49|cp50|cp51|cp5
2|cp53| cp54|cp55|nc2|cp57|cp58|cp59|cp60|cp61|cp62|cp63
Values 0.0.0.0 — 255.255.255.255
Values
0 — 32
Values 0.0.0.0 — 255.255.255.255
7210 SAS M, X Router Configuration Guide