Alcatel-Lucent 7210 SAS M Configuration Manual page 78

Show Commands
===============================================================================
A:ALA-A#
A:ALA-A# show router static-route next-hop 10.10.0.254
===============================================================================
Route Table
===============================================================================
IP Addr/mask
-------------------------------------------------------------------------------
192.168.253.0/24
===============================================================================
A:ALA-A#
status
Syntax status
Context show>router
Description
This command displays the router status.
Output Router Status Output — The following table describes the output fields for router status
information.
Router
OSPF
ISIS
MPLS
LDP
BGP
Max Routes
Total Routes
ECMP Max Routes
Triggered Poli-
cies
Sample Output
Note that there are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are
present when that particular OSPF instance is configured.
Page 78
Pref Metric Type Nexthop
5 1
Label
The administrative and operational states for the router.
The administrative and operational states for the OSPF protocol.
The administrative and operational states for the IS-IS protocol.
The administrative and operational states for the MPLS protocol.
The administrative and operational states for the LDP protocol.
The administrative and operational states for the BGP protocol.
The maximum number of routes configured for the system.
The total number of routes in the route table.
The number of ECMP routes configured for path sharing.
No — Triggered route policy re-evaluation is disabled.
Yes — Triggered route policy re-evaluation is enabled.
NH 10.10.0.254
Description
7210 SAS M, X Router Configuration Guide
Interface Active
n/a N