Alcatel-Lucent 7210 SAS M Configuration Manual page 157

Clear Commands
ip
Syntax ip ip-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description
Clears the counters associated with the IP filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the IP filter policy entries.
Parameters ip-filter-id — The IP filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
log
Syntax log log-id
Context clear
Description
Clears the contents of a memory or file based filter log.
This command has no effect on a syslog based filter log.
Parameters log-id — The filter log ID destination expressed as a decimal integer.
mac
Syntax mac mac-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Clears the counters associated with the MAC filter policy.
7210 SAS M, X Router Configuration Guide
Values 1 — 65535
cleared.
Values
1 — 65535
Values
1 — 100
Filter Policies
Page 157