Alcatel-Lucent 7210 SAS M Configuration Manual page 80

Show Commands
Tunnel ID
Pref
Nexthop
Metric
Sample Output
A:ALA-A>config>service# show router tunnel-table
===============================================================================
Tunnel Table
===============================================================================
Destination Owner
-------------------------------------------------------------------------------
10.0.0.1/32
10.0.0.1/32
10.0.0.1/32
10.0.0.1/32
===============================================================================
A:ALA-A>config>service#
A:ALA-A>config>service#
===============================================================================
Tunnel Table Summary (Router: Base)
===============================================================================
-------------------------------------------------------------------------------
LDP
SDP
===============================================================================
A:ALA-A>config>service#
Page 80
Label
Specifies the tunnel (SDP) identifier.
Specifies the route preference for routes learned from the configured
peer(s).
The next hop for the route's destination.
The route metric value for the route.
Encap Tunnel Id
sdp GRE
sdp GRE
sdp GRE
sdp GRE
show router tunnel-table summary
Description (Continued)
Pref Nexthop
1
10 5 0.0.0.1
21 5 10.0.0.1
31 5 10.0.0.1
41 5 10.0.0.1
Active
1
1
7210 SAS M, X Router Configuration Guide
Metric
0
0
0
0
Available
1
1