Table 7: Service Ingress Qos Policy Ip Match Criteria; Table 8: Service Ingress Qos Policy Mac Match Criteria; Table 9: Mac Match Ethernet Frame Types - Alcatel-Lucent 7950 Quality Of Service Manual

QoS Policies

Table 7: Service Ingress QoS Policy IP Match Criteria

• Destination IP address/prefix
• Destination port/range
• IP fragment
• Protocol type (TCP, UDP, etc.)
• Source port/range
• Source IP address/prefix
• DSCP value

Table 8: Service Ingress QoS Policy MAC Match Criteria

• IEEE 802.2 LLC SSAP value/mask
• IEEE 802.2 LLC DSAP value/mask
• IEEE 802.3 LLC SNAP OUI zero or non-zero value
• IEEE 802.3 LLC SNAP PID value
• IEEE 802.1p value/mask
• Source MAC address/mask
• Destination MAC address/mask
• EtherType value
The MAC match criteria that can be used for an Ethernet frame depends on the frame's format. See
Table 9.

Table 9: MAC Match Ethernet Frame Types

Frame Format
802dot3
Ethernet-II
The 802dot3 frame format matches across all Ethernet frame formats where only the source MAC,
destination MAC and IEEE 802.1p value are compared. The other Ethernet frame types match
those field values in addition to fields specific to the frame format.
can be matched for the various MAC frame types.
Page 42
IP Criteria
MAC Criteria
IEEE 802.3 Ethernet frame. Only the source MAC, destination MAC and
IEEE 802.1p value are compared for match criteria.
Ethernet type II frame where the 802.3 length field is used as an Ethernet
type (Etype) value. Etype values are two byte values greater than 0x5FF
(1535 decimal).
Description
Table 10
7950 XRS Quality of Service Guide
lists the criteria that