Alcatel-Lucent 7210 SAS M Configuration Manual page 158

Show Commands
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default
Clears all counters associated with the MAC filter policy entries
Parameters
mac-filter-id — The MAC filter policy ID.
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
Page 158
Values
1 — 65535
cleared.
Values 1 — 65535
7210 SAS M, X Router Configuration Guide