Alcatel-Lucent 7210 SAS M Configuration Manual page 73

spmsi
join-tlv-packing
data-delay-interval: 3 seconds
data-threshold
===============================================================================
policy
Syntax policy [name | prefix-list name | admin]
Context show>router
Description This command displays policy-related information.
Parameters name — Specify an existing policy-statement name.
prefix-list name — Specify a prefix list name to display the route policy entries.
admin — Specify the admin keyword to display the entities configured in the config>router>policy-
route-table
Syntax route-table [ip-prefix[/prefix-length] [longer | exact]] | [protocol protocol-name] [all]]
Context show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
summary — Displays a route table summary information.
Output Standard Route Table Output — The following table describes the standard output fields for the
route table.
Dest Address
Next Hop
Type
7210 SAS M, X Router Configuration Guide
: pim-ssm 225.0.0.0/32
: N/A
: 224.0.0.0/4 --> 1 kbps
options context.
Values
ipv4-address:
ipv4-prefix-length:
Label
The route destination address and mask.
The next hop IP address for the route destination.
Local — The route is a local route.
IP Router Configuration
a.b.c.d (host bits must be set to 0)
0 — 32
Description
Page 73