Alcatel-Lucent 7210 SAS M Configuration Manual page 131

protocol-id — Configures the decimal value representing the IP protocol to be used as an IP filter
7210 SAS M, X Router Configuration Guide
match criterion. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). The no form
the command removes the protocol from the match criteria.
Values
0 — 255 (values can be expressed in decimal, hexidecimal, or binary - DHB)
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp,
igp, ip, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Protocol Protocol ID
icmp 1
igmp 2
ip 4
tcp 6
egp 8
igp 9
udp 17
rdp 27
idrp 45
rsvp 46
gre 47
iso-ip 80
eigrp 88
ospf-igp 89
ether-ip 97
encap 98
pnni 102
pim 103
vrrp 112
l2tp 115
stp 118
ptp 123
isis 124
crtp 126
crudp 127
Description
Internet Control Message
Internet Group Management
IP in IP (encapsulation)
Transmission Control
Exterior Gateway Protocol
Any private interior gateway (used by Cisco for IGRP)
User Datagram
Reliable Data Protocol
Inter-Domain Routing Protocol
Reservation Protocol
General Routing Encapsulation
ISO Internet Protocol
EIGRP
OSPFIGP
Ethernet-within-IP Encapsulation
Encapsulation Header
PNNI over IP
Protocol Independent Multicast
Virtual Router Redundancy Protocol
Layer Two Tunneling Protocol
Spanning Tree Protocol
Performance Transparency Protocol
ISIS over IPv4
Combat Radio Transport Protocol
Combat Radio User Datagram
Filter Policies
Page 131