Configuring Ip Router Parameters; Interfaces; Network Interface - Alcatel-Lucent 7210 SAS M Configuration Manual

Configuring IP Router Parameters

Configuring IP Router Parameters
In order to provision services on a 7210 SAS router, logical IP routing interfaces must be
configured to associate attributes such as an IP address or the system with the IP interface.
A special type of IP interface is the system interface. A system interface must have an IP address
with a 32-bit subnet mask. The system interface is used as the router identifier by higher-level
protocols such as OSPF and BGP, unless overwritten by an explicit router ID.
The following router features can be configured:
•
•

Interfaces

7210 SAS routers use different types of interfaces for various functions. Interfaces must be
configured with parameters such as the interface type (system) and address. A port is not
associated with a system interface. An interface can be associated with the system (loopback
address).

Network Interface

A network interface (a logical IP routing interface) can be configured on a physical port.
Page 16
Interfaces on page 16
Autonomous Systems (AS) on page 20
7210 SAS M, X Router Configuration Guide