From a Network Interface
To delete a filter from a network interface, enter the following CLI commands:
CLI Syntax: config>router# interface ip-int-name
Example:
From the Filter Configuration
After you have removed the filter from the SAP, use the following CLI syntax to delete the filter.
CLI Syntax: config>filter# no ip-filter filter-id
CLI Syntax: config>filter# no mac-filter filter-id
Example
13
7210 SAS M, X Router Configuration Guide
ingress
config>router>if>ingress#
config>router>if>ingress#exit
:
config>filter# no ip-filter 11 config>filter# no mac-filter
no filter ip 2
Filter Policies
Page 119