Alcatel-Lucent 7210 SAS M Configuration Manual page 65

Show Commands
aggregate
Syntax aggregate [active]
Context show>router
Description
This command displays aggregate routes.
Parameters
factive — When the active keyword is specified, inactive aggregates are filtered out.
arp
Syntax arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic |
static]
Context show>router
Description
This command displays the router ARP table sorted by IP address. If no command line options are spec-
ified, all ARP entries are displayed.
Parameters
ip-address/mask — Only displays ARP entries associated with the specified IP address and mask.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
summary — Displays an abbreviate list of ARP entries.
[local | dynamic | static] — Only displays ARP information associated with the keyword.
Output ARP Table Output — The following table describes the ARP table output fields:
IP Address
MAC Address
Expiry
Type
*Man
Int
7210 SAS M, X Router Configuration Guide
Label
The IP address of the ARP entry.
The MAC address of the ARP entry.
The age of the ARP entry.
Dyn — The ARP entry is a dynamic ARP entry.
Inv — The ARP entry is an inactive static ARP entry (invalid).
Oth — The ARP entry is a local or system ARP entry.
Sta — The ARP entry is an active static ARP entry.
The ARP entry is a managed ARP entry.
The ARP entry is an internal ARP entry.
IP Router Configuration
Description
Page 65